
SciEnggJ 19 (Supplement) 475-487
available online: 19 November 2026
DOI: https://doi.org/10.54645/202619SupNTH-73
*Corresponding author
Email Address: marla.redillas@dlsu.edu.ph
Date received: 15 June 2026
Date revised: 09 August 2026
Date accepted: 01 September 2026
Design of rainwater harvesting tanks in different climate types modeled under SSP scenarios
Rainwater harvesting (RWH) is an adaptation strategy for managing rainfall variability, but changing rainfall patterns make standardized RWH designs difficult, and few studies have related changing climate conditions in different climate types to RWH designs optimized for runoff generation.This study designed RWH tanks for four Philippine climate types, using the Personal Computer Storm Water Management Model (PCSWMM) with rainfall projected under climate-change scenarios.Daily rainfall for 1985-2014 was collected for one city in each of the four Philippine climate types and projected to 2015-2044 using global climate models (GCMs) under Shared Socioeconomic Pathways (SSP2-4.5, SSP3-7.0, SSP4-3.4, and SSP4-7.0, and served as modeling input to depict runoff reduction performance and design sizing. Results show that runoff reduction generated by rainfall tanks can peak at nearly 80-90% across three climate types (II, III, and IV) from the largest tank size (1200 L), although the roof runoff reduction decreases as rainfall increases. Tanks were then sized for 50%, 75%, and 99% runoff reduction at each site. The relationship between rainfall depth and the ratio of storage volume to catchment area (SV/CA) was mostly linear in Type I and IV climates, nonlinear in Type II, and mixed in Type III. These findings suggest that RWH design requirements differ among climate types and rainfall conditions. The relationships may serve as a starting point for climate-responsive RWH sizing and for site-specific planning in the Philippines.
© 2026 SciEnggJ
Philippine-American Academy of Science and Engineering