
SciEnggJ 19 (Supplement) 500-508
available online: 19 November 2026
DOI: https://doi.org/10.54645/202619SupTRJ-14
*Corresponding author
Email Address: marco4138@gmail.com
Date received: 15 June 2026
Dates revised: 30 July 2026; 07 September 2026
Date accepted: 23 September 2026
Highly hydrophobic behavior of SLA 3D-printed micropillar arrays with carnauba wax coating
This study presents the design and fabrication of highly hydrophobic micropillar arrays by stereolithography (SLA) 3D printing, with systematic variation of geometrical parameters to reduce surface wetting. Hydrophobicity depends on both surface roughness and surface chemistry. Microstructural features were therefore designed and produced by controlled 3D printing. The printer's limits on feature size and pillar spacing were first established at 200 µm. Three pillar shapes were evaluated: cylindrical, conical, and inverted conical. Conical pillars were printed with the highest fidelity, whereas cylindrical and inverted conical pillars were affected by light bleeding and unintended curing, which compromised their structure. The effects of pillar height and surface modification were then investigated. Samples were treated with alkali and coated with carnauba wax, a natural material with low surface energy. Wetting was quantified by static water contact angle measured with an optical tensiometer. Micro-scale roughness for 1000 µm pillar height combined with single wax coating raised the contact angle to a mean of 140.72° ± 12.84°, compared with 67.17° ± 3.91° for an uncoated flat surface. Three-dimensional microscopy gave an areal height parameter (Sa) of 173.03 µm and a root-mean-square height (Sq) of 210.29 µm for the best-performing sample, values dominated by the pillar height. Scanning electron microscopy showed differences in surface texture, pillar shape, and wax coverage, and Fourier-transform infrared spectroscopy identified the functional groups of the resin and the wax and the small changes after alkali treatment. Overall, SLA microstructuring combined with a carnauba wax coating is an effective way to make hydrophobic surfaces, although durability and dynamic wetting were not evaluated.
© 2026 SciEnggJ
Philippine-American Academy of Science and Engineering